Lexmark 4049LMO Service Manual - Page 62
Diagnostic Aids, Diagnostics Mode, Diagnostics Mode Menu Structure
View all Lexmark 4049LMO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4049-XXX 3. Diagnostic Aids Diagnostics Mode To run the remainder of the printer diagnostic tests described in this chapter, you must put the printer in Diagnostics mode. To enter Diagnostics mode: 1. Turn the printer off. 2. Press and hold the Ready and Return buttons. Then turn the printer on. The printer performs the Power-On Self Test. 3. Release the buttons when [Performing Self Test] is displayed. 4. You can exit Diagnostics mode without a POR by selecting [Reset Printer]. Diagnostics Mode Menu Structure The following is the Diagnostics mode menu structure, The indented items are submenus available under the main menu items, which are in capital letters on the operator panel. Menu items referring to options will only be present if those options are installed. Menus with more than four items will use [MORE] on the fourth operator panel button to access the next screen of selections. PRINT TESTS Print Test 1 Print Test 2 Print Test 3 Envelope Print Test PRINT REGISTRATION Left Margin Top Margin Bottom Margin Quick Test HARDWARE TESTS LCD Test Sensor Tests Toner Low 3-1