Lexmark 4049LMO Service Manual - Page 30
Top Cover Open or Print, Font Card Not Supported
View all Lexmark 4049LMO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4049-XXX Error Code 30 Top Cover Open or Print Cartridge Missing 32 Wrong Print Cartridge installed 37 Insufficient Collation Memory 38 Memory Full 39 Complex Page 43 Font Card Not Supported 44 Defective Font Card 47 Font Card Removed While Printing 51 Defective Flash 52 Flash Full 53 Unformatted Flash Explanation Make sure the spring-mounted pin on the printhead shroud is installed properly and that it is detected by the ramp on the print cartridge as the cover closes. The pin should enter the tower on the HVPS and depress the cover switch. The installed print cartridge is not supported by the Optra printer. Memory is too full to collate the print job. Memory used to store pages is full. To verify that the printer recognizes all the installed memory, go to the user menus and print the "Print Menus" test page. Make sure the memory shown on the printout matches the installed memory. Page too complex to print.To verify that the printer recognizes all the installed memory, go to the user menus and print the "Print Menus" test page. Make sure the memory shown on the printout matches the installed memory. Font card format not supported by printer. Defective font card installed in font slot. Printer needs data on removed card. The printer detects a defective Flash SIMM. If the error recurs replace the Flash SIMM. Not enough flash memory for data requested to be stored. Flash problem at POR or while attempting to write. 2-3