Lexmark 4049LMO Service Manual - Page 99
Fuser Lamp Removal
View all Lexmark 4049LMO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
4049-XXX Fuser Lamp Removal CAUTION: THE TEMPERATURE OF THE HOT ROLLER IS 150230 ° C (302-446 ° F). USE EXTREME CAUTION WHEN REMOVING THIS UNIT. BEFORE YOU SERVICE THIS UNIT, ALLOW THE MACHINE TO COOL FOR 5 MINUTES. Note: The fuser lamp is a glass heater. Do not touch the lamp with your hands; skin oils and acids can reduce the life of the heater lamp. Use a soft cloth to handle the heater lamp at all times if the lamp is to be reinserted. 1. Remove the fuser. 2. Remove the right lamp bracket [A]. 3. Carefully pull the lamp [B] out to the right, using a soft cloth if the lamp is to be reinserted. Install the new lamp with the color-coded end away from the gear. Repair Information 4-20
Repair Information 4-20
4049-XXX
Fuser Lamp Removal
CAUTION:
THE TEMPERATURE OF THE HOT ROLLER IS 150-
230° C (302-446° F). USE EXTREME CAUTION WHEN REMOV-
ING THIS UNIT. BEFORE YOU SERVICE THIS UNIT, ALLOW THE
MACHINE TO COOL FOR 5 MINUTES.
Note:
The fuser lamp is a glass heater. Do not touch the lamp with
your hands; skin oils and acids can reduce the life of the heater
lamp. Use a soft cloth to handle the heater lamp at all times if the
lamp is to be reinserted.
1.
Remove the fuser.
2.
Remove the right lamp bracket [
A
].
3.
Carefully pull the lamp [
B
] out to the right, using a soft cloth if
the lamp is to be reinserted.
Install the new lamp with the color-coded end away from the
gear.