Lexmark 4049LMO Service Manual - Page 78

Other Tests, Developed Image Test, LAN Information

Get Lexmark 4049LMO - Optra Lx+ B/W Laser Printer PDF manuals and user guides View all Lexmark 4049LMO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

4049-XXX A [Passed] message indicates the printer connection to the printer cable connector is good. A [Failed] message indicates a defective RIP board. Note: Ignore the number displayed after a failure is displayed. 10. Press Return to return to the Diagnostics mode main menu. 11. Turn the printer off, and remove the wrap plug from the interface connector. Other Tests Developed Image Test Use the Developed Image Test to isolate print quality problems. You might have to practice this procedure several times to get the timing correct. To run the Developed Image Test: 1. Open the front exit tray. 2. Print the test page. 3. As soon as the leading edge of the paper is visible coming out the front exit slot, turn off the printer. 4. Remove the print cartridge and look at the image on the photo- conductor. LAN Information The printer may be connected to one of the following LAN types: Token-Ring Ethernet 10BASE-T Ethernet 10BASE2 LocalTalk The printer test page indicates to which type of LAN the printer is connected.The Network external connectors are shown below. 3-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
3-17
4049-XXX
A [Passed] message indicates the printer connection to the printer
cable connector is good.
A [Failed] message indicates a defective RIP board.
Note:
Ignore the number displayed after a failure is displayed.
10.
Press Return to return to the Diagnostics mode main menu.
11.
Turn the printer off, and remove the wrap plug from the interface
connector.
Other Tests
Developed Image Test
Use the Developed Image Test to isolate print quality problems. You
might have to practice this procedure several times to get the timing
correct.
To run the Developed Image Test:
1.
Open the front exit tray.
2.
Print the test page.
3.
As soon as the leading edge of the paper is visible coming out
the front exit slot, turn off the printer.
4.
Remove the print cartridge and look at the image on the photo-
conductor.
LAN Information
The printer may be connected to one of the following LAN types:
Token-Ring
Ethernet 10BASE-T
Ethernet 10BASE2
LocalTalk
The printer test page indicates to which type of LAN the printer is
connected.The Network external connectors are shown below.