Lexmark CX410 User's Guide - Page 104
Connecting to a distinctive ring service, Setting the outgoing fax name and number, Settings
View all Lexmark CX410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Faxing 104 3 If you want to connect a telephone and answering machine to the same wall jack, then connect the devices as shown. Note: Do not remove the adapter plug from the port of the printer if you are connecting to a serial or cascaded telephone system. Connecting to a distinctive ring service A distinctive ring service may be available from your telephone company. This service lets you have multiple telephone numbers on one telephone line, with each telephone number having a different ring pattern. This may be useful for distinguishing between fax and voice calls. If you subscribe to a distinctive ring service, then follow these steps to connect the equipment: 1 Connect one end of the telephone cable that came with the printer to the printer LINE port . 2 Connect the other end of the telephone cable to an active analog telephone wall jack. 3 Change the distinctive rings setting to match the setting you want for the printer to answer. Note: The factory default setting for distinctive rings is On. This sets the printer to answer single, double, and triple ring patterns. a From the home screen, navigate to: > Settings > Fax Settings > Analog Fax Setup > Answer On b Select the pattern setting you want to change, and then touch . Setting the outgoing fax name and number 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Fax Settings > Analog Fax Setup. 3 In the Fax Name field, type the name to be printed on all outgoing faxes.