Lexmark CX410 User's Guide - Page 144

Understanding printer menus 144 Security Audit Log menu Use Export Log Delete Log Yes No Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0-23 Severity of events to log 0-7 To Let an authorized user export the security audit log. Note: The log can be downloaded from the Embedded Web Server and saved on a computer. Specify whether audit logs are deleted. Note: Yes is the factory default setting. Specify how audit logs are configured. Notes: • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting. • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting. • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting. • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting. Set Date and Time menu Use Current Date and Time Manually Set Date and Time [input date/time] Time Zone [list of time zones] Automatically observe DST On Off Enable NTP On Off To View the current date and time settings for the printer. Enter the date and time. Notes: • Manually setting the date and time sets Enable NTP to No. • The wizard lets you set the date and time in YYYY‑MM‑DD‑HH:MM format. Select the time zone. Note: GMT is the factory default settings. Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting. Note: On is the factory default setting. Enable Network Time Protocol, which synchronizes the clocks of devices on a network. Notes: • On is the factory default setting. • This setting is turned off if you manually set the date and time.