Lexmark CX410 User's Guide - Page 151

Understanding printer menus Use Contact Name Location Alarms Alarm Control Cartridge Alarm Timeouts Standby Mode Disabled 1-240 Timeouts Sleep Mode Disabled 1-120 Timeouts Hibernate Timeout Disabled 1-3 hours 6 hours 1-3 days 1-2 weeks 1 month 151 To Specify a contact name for the printer. Note: The contact name is stored on the Embedded Web Server. Specify the location of the printer. Note: The location is stored on the Embedded Web Server. Set an alarm when the printer requires operator intervention. When activated, Alarm Control lets you set the number of times that the alarm sounds, while Cartridge Alarm lets you stop printing when a cartridge-low condition occurs. For each alarm type, select from the following options: • Off • Single • Continuous Notes: • Single is the factory default setting for Alarm Control and Cartridge Alarm. This sounds three quick beeps. • Off means no alarm will sound. • Continuous repeats three beeps every 10 seconds. Specify the number of minutes of inactivity before the printer enters a lower power state. Note: 15 is the factory default setting. Set the amount of time in seconds the printer waits after a job is printed before it goes into a reduced power state. Notes: • 30 is the factory default setting. • Disabled appears only when Energy Conserve is set to Off. • Lower settings conserve more energy, but may require longer warm‑up times. • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm‑up time. Set the printer to operate at a low power state. Notes: • Disabled is the factory default setting for Class A and Class B printers in all countries except for European Union countries and Switzerland. • "3 days" is the factory default setting for Class B printers in all European Union countries and Switzerland.