Lexmark MX6500e Quick Reference - Page 27

jam, open upper and lower rear, door. [231-234], jam, remove standard bin, jam. [203]

Page 27 highlights

4 From the scanner control panel, touch Done to clear the message and continue printing. [x]‑page jam, open upper and lower rear door. [231-234] CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 1 Pull down the rear door. Note: Make sure all paper fragments are removed. 2 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Close the rear door. 4 Open the rear door of the duplex area, and then push the back of the standard tray. 1 6 Insert the standard tray. 7 From the scanner control panel, touch Done to clear the message and continue printing. [x]‑page jam, remove standard bin jam. [203] 1 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 5 Press down the rear duplex flap, then firmly grasp the jammed paper, and then gently pull out the paper. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

4
From the scanner control panel, touch
Done
to clear the message
and continue printing.
[x]
page jam, open upper and lower rear
door. [231–234]
CAUTION—HOT SURFACE:
The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
1
Pull down the rear door.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note:
Make sure all paper fragments are removed.
3
Close the rear door.
4
Open the rear door of the duplex area, and then push the back of
the standard tray.
5
Press down the rear duplex flap, then firmly grasp the jammed
paper, and then gently pull out the paper.
Note:
Make sure all paper fragments are removed.
1
2
6
Insert the standard tray.
7
From the scanner control panel, touch
Done
to clear the message
and continue printing.
[x]
page jam, remove standard bin
jam. [203]
1
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note:
Make sure all paper fragments are removed.
27