Lexmark MX6500e Quick Reference - Page 31
jam, remove paper, open stapler, door. Leave paper in bin. [455-457]
View all Lexmark MX6500e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 Open the stapler door. 4 Use the metal tab to lift the staple guard, and then remove any loose staples. 3 Close the staple finisher rear door. 4 From the scanner control panel, touch Done to clear the message and continue printing. [x]‑page jam, remove paper, open stapler door. Leave paper in bin. [455-457] 1 From the stapler bin, firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 3 Pull down the latch of the staple cartridge holder, and then pull out the holder from the printer. 5 Press down the staple guard until it clicks into place. 31
3
Close the staple finisher rear door.
4
From the scanner control panel, touch
Done
to clear the message
and continue printing.
[x]
‑
page jam, remove paper, open stapler
door. Leave paper in bin. [455–457]
1
From the stapler bin, firmly grasp the jammed paper on each side,
and then gently pull it out.
Note:
Make sure all paper fragments are removed.
2
Open the stapler door.
3
Pull down the latch of the staple cartridge holder, and then pull out
the holder from the printer.
4
Use the metal tab to lift the staple guard, and then remove any
loose staples.
5
Press down the staple guard until it
clicks
into place.
31