Lexmark X264 User's Guide - Page 115

Understanding printer menus 115 Menu item Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge Description Sets the portrait height Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. Inches can be increased in 0.01‑inch increments. • 356 mm is the international factory default setting. Millimeters can be increased in 1‑mm increments. Specifies the feed direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum length supported in the tray. Reports menu Reports menu Note: When you select a menu item from the Reports menu, the indicated report prints. Menu item Menu Settings Page Device Statistics Network Setup Page Shortcut List Fax Job Log Fax Call Log E‑mail Shortcuts Fax Shortcuts Profiles List Print Fonts Description Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information Prints a report containing printer statistics such as supply information and details about printed pages Prints a report containing information about the network printer settings, such as the TCP/IP address information Note: This menu item appears only for network printers or printers connected to print servers. Prints a report containing information about configured shortcuts Prints a report containing information about the last 200 completed faxes Prints a report containing information about the last 100 attempted, received, and blocked calls Prints a report containing information about e‑mail shortcuts Prints a report containing information about fax shortcuts Prints a list of profiles stored in the printer Prints a report of all the fonts available for the printer language currently set in the printer