Lexmark X264 User's Guide - Page 93
Turning daylight saving time on or off, Sending a fax, Sending a fax using the printer control panel
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Faxing 93 5 In the Network Time Protocol section, select Enable NTP. Note: If you prefer to set the date and time manually, click inside the Manually Set Date & Time box, and then enter the current date and time. 6 Verify that the time zone is correct. 7 Click Submit. Turning daylight saving time on or off The printer can be set to automatically adjust for daylight saving time for certain time zones: 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Security. 4 Click Set Date and Time. 5 Select Automatically Observe DST. 6 Click Submit. Sending a fax Sending a fax using the printer control panel 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 From the printer control panel, press the Fax button. 4 Enter the fax number, and then press . Notes: • To cause a two‑ or three‑second pause in a fax number, press the Redial/Pause button. The dial pause appears as a comma on the "Fax to" line. Use this feature if you need to dial an outside line first. • Press to move the cursor to the left and delete a number. • To use a fax shortcut, press , and then press the arrow buttons until the fax shortcut you want appears. Press . 5 Press 1 to enter another fax number, or press 2 to end fax number entry. 6 Press .