Lexmark X264 User's Guide - Page 117
Network Reports menu, Network/Ports, Standard Network, Network <x>, Std Network Setup
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Understanding printer menus 117 Menu item NPA Mode Off Auto Network Buffer Disabled Auto Mac Binary PS On Off Auto Network Setup Reports Menu Network Card menu TCIP Menu IPv6 Menu Wireless menu AppleTalk menu Description Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: • Auto is the factory default setting • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated. Sets the size of the network input buffer Notes: • Auto is the factory default setting. • The value can be changed in 1‑K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the Network Buffer, disable or reduce the size of the USB buffer. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated. Sets the printer to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • The Off setting filters print jobs using the standard protocol. • The On setting processes raw binary PostScript print jobs. Lists all the network setup menus, regardless of the active network of the printer Note: Certain options are not available on selected printer models. Network Reports menu This menu is available from the Network/Ports menu: Network/Ports > Standard Network or Network > Std Network Setup or Net Setup > Reports or Network Reports Menu item Description Print Setup Page Prints a report containing information about the current network setup Note: The Print Setup Page contains information about the network printer settings, such as the TCP/IP address.