Lexmark X264 User's Guide - Page 120

Understanding printer menus 120 This menu is available from the Network/Ports menu: Network/Ports > Network > Net Setup > Wireless Menu item Network Mode Infrastructure Ad hoc Compatibility 802.11n 802.11b/g 802.11b/g/n Choose Network View Signal Quality View Security Mode Description Specifies the network mode Notes: • Infrastructure mode lets the printer access a network using an access point. • Ad hoc is the factory default setting. Ad hoc mode configures the printer for wireless networking directly between it and a computer. Specifies the wireless standard for the wireless network Note: 802.11b/g/n is the factory default setting. Lets you select an available network for the printer to use Note: If the network you want to join is protected by a security setting, you will have to join it from the Embedded Web Server or the Wireless Setup Utility. Lets you view the quality of the wireless connection Lets you view the encryption method for the wireless connection. "Disabled" indicates that the wireless network is not encrypted. AppleTalk menu Menu item Activate Yes No View Name View Address Set Zone Description Activates or deactivates AppleTalk support Note: Yes is the factory default setting. Shows the assigned AppleTalk name Shows the assigned AppleTalk address Provides a list of AppleTalk zones available on the network Note: The factory default setting is the default zone for the network. If no default zone exists, the zone marked with an * is the factory default setting.