Lexmark X264 User's Guide - Page 74
Placing separator sheets between copies, Copying multiple s onto a single sheet, Settings
View all Lexmark X264 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Copying 74 5 Press the arrow buttons until Collate appears, and then press . 6 Press the arrow buttons until On [1,2,1,2,1,2] or Off [1,1,1,2,2,2] appears, and then press to select one. 7 Press . 8 If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad. 9 Press to return to Ready. Placing separator sheets between copies 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the address in the TCP/IP section. 2 Click Settings. 3 Click Copy Settings. 4 Click Separator Sheets. Note: Collate must be On for the separator sheets to be placed between copies. If Collate is Off, then the separator sheets are added to the end of the print job. 5 Select one of the following: • Between pages • Between copies • Between jobs 6 Click Submit. Copying multiple pages onto a single sheet In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper. Notes: • The Paper Size must be set to Letter, Legal, A4, or B5 JIS. • The Copy Size must be set to 100%. 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. 2 If you are loading a document into the ADF, then adjust the paper guides. 3 From the printer control panel, press the Copy button. 4 Press the Options button. 5 Press the arrow buttons until Paper Saver appears, and then press .