Marantz SR5005 SR5005 User Manual - English - Page 18

Simple version Basic version SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH About ARC (Audio return channel) function The Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data "upstream" to this unit. NOTE • To enable the ARC function,set "HDMI Control" to "ON" (vpage 58). • When connecting a TV that does not support the ARC function, a separate connection using an audio cable is required. In this case, refer to "Connecting a TV" (vpage 16) for the connection method. About Content Type The HDMI Specification Version 1.4a enables simple, automated picture setting selection with no user intervention. NOTE To enable the Content type, set "Video Mode" to "Auto" (vpage 49). Cables used for connections Audio and video cable (sold separately) HDMI cable • This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable. Blu-ray Disc Game player DVD player Set-top box console TV Connecting an HDMI-compatible device • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color transmission, please use a "High Speed HDMI cable" or "High Speed HDMI cable with Ethernet". • Video signals are not output if the input video signals do not match the monitor's resolution. In this case, switch the Blu-ray Disc/DVD player's resolution to a resolution with which the monitor is compatible. • When this unit and monitor are connected with an HDMI cable, if the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor. NOTE The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs. Connecting to a device equipped with a DVI-D connector When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D connector. NOTE • No sound is output when connected to a device equipped with a DVI-D connector. Make separate audio connections. • Signals cannot be output to DVI-D devices that do not support HDCP. • Depending on the combination of devices, the video signals may not be output. HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI IN nnSettings related to HDMI connections Set as necessary. For details, see the respective reference pages. Input Assign (vpage 48) Set this to change the HDMI input connector to which the input source is assigned. HDMI Setup (vpage 58) Make settings for HDMI video/audio output. • Auto Lip Sync • HDMI Audio Out • HDMI Control • Standby Source • Power Off Control NOTE The audio signals output from the HDMI connectors are only the HDMI input signals. Advanced version Information 15