Marantz SR5005 SR5005 User Manual - English - Page 53
Input Mode - arc setup
View all Marantz SR5005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Setting items Progressive Mode Set an appropriate progressive conversion mode for the source video signal. BD DVD VCR SAT GAME z AUX1 TV z Aspect Set the aspect ratio for the video signals output to the HDMI. BD DVD VCR SAT GAME z AUX1 TV z Setting details Auto : The video signal is automatically detected and the appropriate mode is set. Video1 : Select mode suitable for video playback Video2 : Select mode suitable for video and 30-frame film material playback. This item can be set when "i/p Scaler" is set to anything other than "OFF". Full : Output at 16:9 aspect ratio. Normal : Output at 4:3 aspect ratio. "Aspect" can be set when "i/p Scaler" is set to anything other than "OFF". NEDERLANDS SVENSKA Input Setup Input Mode Default settings are underlined. The input modes available for selection may vary depending on the input source. Setting items Input Mode Set the audio input modes for the different input sources. Setting details Auto : Automatically detect input signal and perform playback. HDMI : Play only signals from HDMI input. Digital : Play only signals from digital input. Analog : Play only signals from analog input. 7.1CH INPUT : Only signals input from the 7.1CH INPUT terminal will be played back. • "HDMI" can be set for input sources for which "HDMI" is assigned at "Input Assign" (vpage 48). • "Digital" can be set for input sources for which "Digital" is assigned at "Input Assign" (vpage 48). • If the input source is set to "TV" or "Game", it cannot be set to "Analog". • When digital signals are properly input, the indicator lights on the display. If the indicator does not light, check the digital input connector assignment and the connections. • If "HDMI Control" is set to "ON" and a TV compatible with the ARC is connected via the HDMI MONITOR connectors, the input mode whose input source is "TV" is fixed to ARC. This can also be set by pressing A/D on the remote control unit. Each time A/D is pressed, the setting is changed as shown below. Decode Mode Set the decode mode for input source. BD DVD VCR SAT GAME AUX1 TV CD SIRIUS Auto HDMI Digital Analog 7.1CH INPUT Auto : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. • This item can be set for input sources for which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 48). • Normally set this mode to "Auto". Set "PCM" and "DTS" when inputting the corresponding input signal. • This can also be set by pressing D.MODE on the remote control unit. 50 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu