Marantz SR5005 SR5005 User Manual - English - Page 63

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Setting items Power On Level Define the volume setting that is active when the power is turned on. Mute Level Set the amount of attenuation when muting is on. Setting details Last : Use the memorized setting from the last session. - - - (0) : Always mute when power is turned on. -80dB - 18dB (1 - 99) : The volume is adjusted to the set level. • This can be set when the ZONE2 "Volume Level" setting (vpage 59) is "Variable". • This is displayed from 0 to 99 when "Volume Display" (vpage 60) is set to "Absolute". Full : The sound is muted entirely. -40dB : The sound is attenuated by 40 dB down. -20dB : The sound is attenuated by 20 dB down. Option Setup Default settings are underlined. Make various other settings. Setting items Volume Control Set the volume setting. Setting details Volume Display : Set how volume is displayed. • Relative : Display - - -dB (Min), in the range -80.5 dB - 18 dB. • Absolute : Display in the range 0 (Min) - 99. Source Delete Remove from the display input sources that are not used. The "Volume Display" setting is applied also to the "Volume Limit" and "Power On Level" display method. Volume Limit : Make a setting for maximum volume. • OFF : Do not set a maximum volume. • -20dB (61) / -10dB (71) / 0dB (81) Power On Level : Define the volume setting that is active when the power is turned on. • Last : Use the memorized setting from the last session 0) : Always use the muting on condition when power is turned on. • -80dB - +18dB (1 - 99) : The volume is adjusted to the set level. Mute Level : Set the amount of attenuation when muting is on. • Full : The sound is muted entirely. • -40dB : The sound is attenuated by 40 dB down. • -20dB : The sound is attenuated by 20 dB down. BD / DVD / VCR / SAT / GAME / AUX1 / USB / TV / CD / SIRIUS / TUNER / M-XPort : Select input source that is not used. • ON : Use this source. • Delete : Do not use this source. NOTE Input sources set to "Delete" cannot be selected using SOURCE SELECT. Manual Setup Setting items Setting details On-Screen Display Make the settings related to displays on the TV screen. Screensaver : Make screensaver settings. • ON : The screen saver is activated during menu display, iPod or TUNER screen display if no operation is performed for an approximately 3-minute continuous period. When you press uio p, the screensaver is cancelled and the screen before that screen saver started is displayed. • OFF : Screensaver is not activated. Text : Display the details of operation when switching surround mode, input mode, etc. • ON : Turn display on. • OFF : Turn display off. Master Volume : Display the master volume during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set to "Top". USB : Set the USB screen display time when the input source is "USB". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. TUNER : Set the tuner screen display time when the input source is "TUNER" or "SIRIUS". • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off. Zone Rename • Up to 10 characters can be input. Change the display title of • For character input, see page 45. each zone to one you prefer. Default : The changed display names are reset to the defaults. • Yes : Reset to the defaults. • No : Do not reset to the defaults. 60 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu