Marantz SR5005 SR5005 User Manual - English - Page 9

ENGLISH DEUTSCH FRANÇAIS 3 Turn on power 1 Turn on the TV and subwoofer power. Power on 2 Change the TV input to the input of this unit. 3 Press ON to turn on power to the unit. The power indicator switches off, and power is supplied to the unit. Power on Power on ITALIANO ESPAÑOL 1 2345 NEDERLANDS SVENSKA 4 Set up speakers (Audyssey® Auto Setup) 1 2345 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called "Audyssey Auto Setup". To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six positions, as shown in the illustration (up to six positions). •• When performing Audyssey Auto Setup, MultEQ®/Dynamic EQ®/Dynamic Volume® functions become active (vpage 53, 54). •• To set up the speakers manually, use "Speaker Setup" (vpage 56) on the menu. NOTE • Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices as measurements may be affected by these sounds. • Cell phones should be placed away from all audio electronics during the measurement process as Radio Frequency Interference (RFI) may cause measurement disruptions (even if the cell phone is not in use). • Do not unplug the setup microphone from the main unit until Audyssey Auto Setup is completed. • Do not stand between the speakers and setup microphone or allow obstacles in the path while the measurements are being made. This will cause inaccurate readings. • Loud test sounds may be played during Audyssey Auto setup. This is part of normal operation. If there is background noise in room, these test signals will increase in volume. • Operating VOLUME + - during the measurements will cancel the measurements. • Measurement cannot be performed when headphones are connected. 6 The "Simple version" section provides the speaker installation, connection, and setup methods for the 7.1-channel system with surround back speakers. For the installing, connecting, and setup methods of speakers other than the 7.1-channel system (with surround back speakers), see page 33.