Marantz SR5005 SR5005 User Manual - English - Page 57

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Setting items Dynamic EQ® Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ. Setting details ON : Use Dynamic EQ. OFF : Do not use Dynamic EQ. • is displayed when set to "ON". • This can also be set by pressing DYN EQ on the remote control unit. Each time DYN EQ is pressed, the setting is changed as shown below. Dynamic EQ : ON Dynamic EQ : OFF Reference Level Offset Audyssey Dynamic EQ is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB. However, film reference level is not always used in music or other non-film content. Dynamic EQ Reference Level Offset provides three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard. 0dB (Film Ref) : This is the default setting and should be used when listening to movies. 5dB : Select this setting for content that has a very wide dynamic range, such as classical music. 10dB : Select this setting for jazz or other music that has a wider dynamic range. This setting should also be selected for TV content as that is usually mixed at 10 dB below film reference. 15dB : Select this setting for pop/rock music or other program material that is mixed at very high listening levels and has a compressed dynamic range. Setting is enabled when "Dynamic EQ" is "ON" (vpage 54). NEDERLANDS SVENSKA Audio Adjust Setting items Dynamic Volume® Solve the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user's preferred volume setting. Setting details Heavy : Most adjustment to softest and loudest sounds. Medium : Medium adjustment to loudest and softest sound. Light : Least adjustment to loudest and softest sounds. OFF : Do not use the "Dynamic Volume". • is displayed when set to "ON". • If "Dynamic Volume" is set to "Yes" in Auto Setup (vpage 9), the setting is automatically changed to "Heavy". • This can also be set by pressing DYN VOL on the remote control unit. Each time DYN VOL is pressed, the setting is changed as shown below. Dynamic Volume : OFF Dynamic Volume : Heavy Dynamic Volume : Light Dynamic Volume : Medium 54 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu