Nikon D3200 User Manual - Page 164

Eye-Fi Upload G button ➜ B setup menu This option is displayed only when an Eye-Fi memory card (available separately from third-party suppliers) is inserted in the camera. Choose Enable to upload photographs to a preselected destination. Note that pictures will not be uploaded if signal strength is insufficient. Observe all local laws concerning wireless devices and choose Disable where wireless devices are prohibited. When an Eye-Fi card is inserted, its status is indicated by an icon in the information display: • 6: Eye-Fi upload disabled. • 7: Eye-Fi upload enabled but no pictures available for upload. • 8 (static): Eye-Fi upload enabled; waiting to begin upload. • 8 (animated): Eye-Fi upload enabled; uploading data. • !: Error. D Eye-Fi Cards Eye-Fi cards may emit wireless signals when Disable is selected. If a warning is displayed in the monitor (0 193), turn the camera off and remove the card. See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer. The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions. A Supported Eye-Fi Cards As of December 2011, the camera supports 8 GB SDHC Pro X2 Eye-Fi cards. Some cards may not be available in some countries or regions; consult the manufacturer for more information. Eye-Fi cards are for use only in the country of purchase. Be sure the Eye-Fi card firmware has been updated to the latest version. A Using Eye-Fi Cards in Ad Hoc Mode Additional time may be required when connecting using Eye-Fi cards that support ad hoc mode. Select longer values for Auto off timers > Standby timer in the setup menu (0 140). g Firmware Version G button ➜ B setup menu View the current camera firmware version. 148