Nikon D3200 User Manual - Page 39

5 Press the shutter-release button halfway. Press the shutter-release button halfway to focus. The camera will select the focus points automatically. If the subject is poorly lit, the flash may pop up and the AF-assist illuminator may light. 6 Check the indicators in the viewfinder. When the focus operation is complete, the selected focus points will be briefly highlighted, s a beep will sound (a beep may not sound if the subject is moving), and the in-focus indicator (I) will appear in the viewfinder. In-focus indicator Description I Subject in focus. I (flashes) Camera unable to focus using autofocus. See page 36. In-focus indicator Buffer capacity While the shutter-release button is pressed halfway, the number of exposures that can be stored in the memory buffer ("t"; 0 32) will be displayed in the viewfinder. 7 Shoot. Smoothly press the shutter-release button the rest of the way down to release the shutter and record the photograph. The memory card access lamp will light and the photograph will be displayed in the monitor for a few seconds (the photo will automatically clear from the display when the shutter-release button is pressed halfway). Do not eject the memory card or remove or disconnect the power source until the lamp has gone out and recording is complete. Memory card access lamp A Image Sensor Cleaning The camera vibrates the low-pass filter covering the image sensor to remove dust when the camera is turned on or off (0 180). 23