Nikon D3200 User Manual - Page 50
Before Using the Remote Control, Cover the Viewfinder, Using the Built-in Flash, See Also, Self-
View all Nikon D3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
D Before Using the Remote Control Before using the remote control for the first time, remove the clear plastic battery-insulator sheet. A Cover the Viewfinder When taking photos without your eye to the viewfinder, remove the DK-20 rubber eyecup (q) and insert the supplied DK-5 eyepiece cap as shown (w). This prevents light entering via the viewfinder interfering with exposure. Hold the camera firmly when removing the rubber eyecup. DK-20 rubber eyecup q DK-5 eyepiece cap w D Using the Built-in Flash Before taking a photograph with the flash in P, S, A, or M modes, press the M (Y) button to z raise the flash and wait for the M indicator to be displayed in the viewfinder (0 24). Shooting will be interrupted if the flash is raised while a remote control mode is in effect or after the self-timer has started. If the flash is required, the camera will only respond to the ML-L3 shutter-release button once the flash has charged. In auto or scene modes in which the flash pops up automatically, the flash will begin charging when a remote control mode is selected; once the flash is charged, it will automatically pop up and fire when required. In flash modes that support red-eye reduction, the red-eye reduction lamp will light for about one second before the shutter is released in quick-response remote mode. In delayed remote mode, the self-timer lamp will light for two seconds, followed by the red-eye reduction lamp which lights for one second before the shutter is released. A See Also For information on choosing the duration of the self-timer and the number of shots taken, see the Self-timer option in the setup menu (0 141). For information on choosing how long the camera will wait for a signal from the remote, see the Remote on duration option in the setup menu (0 141). For information on controlling the beeps that sound when the self-timer and remote control are used, see the Beep option in the setup menu (0 141). 34