Oki ML490 Network User's Guide for OkiLAN 6120i - Page 142

Section 4 - Appendix A - Troubleshooting Appendix A Troubleshooting Main Status Indicator Upon power-up, the main status indicator flashes orange. It changes to green when the OkiLAN 6120i passes self-test. The indicator stays orange if the OkiLAN 6120i fails self-test. If the indicator turns solid orange due to an error, a configuration sheet will be printed automatically. Check the error message reported on the configuration sheet. Restoring the OkiLAN 6120i to Factory Defaults In most cases, the best way to restore the OkiLAN 6120i to factory defaults is via telnet. However, if you are unable to connect to the device because of a configuration error, use the following method which does not require a network connection. To restore the OkiLAN 6120i to factory defaults, complete the following steps: 1. Power down the OkiLAN 6120i. 2. While holding in the Print Configuration Sheet Test button, power up the OkiLAN 6120i. Hold the button until the status indicator turns solid green. 3. Power cycle the OkiLAN 6120i. It will have restored itself to defaults. TCP/IP OKI OkiLAN 6120i User's Guide IV - 49