Oki ML490 Network User's Guide for OkiLAN 6120i - Page 156

Section 4 - Appendix B - Application Considerations Configuring HP-UX v8.07 for Printing with the OkiLAN 6120i This application note describes the configuration of the printing system on the HP-UX ver. 8.07 of the UNIX operating system. For clarity and brevity, the following specific names will be used to represent general devices or concepts. • lj4 - The local queue name on the HP-UX system to which print jobs that are destined for a printer attached to the OkiLAN 6120i will be directed. • OKIPRINTER - The host name of the remote system which is the OkiLAN 6120i. For example, to telnet to the OkiLAN 6120i and invoke the OkiLAN 6120i Configuration utility, you would type telnet OKIPRINTER. A host name is not required for the OkiLAN 6120i, the IP Address may be used. • yourqueuename - This is the name of the queue on the OkiLAN 6120i and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly. See pages IV-15 and IV-16 for more information on remote queue names. Prerequisites Before you proceed, the following prerequisites must be met. Most of the time, steps 2 through 5 are already configured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 unless the installation procedure fails! 1. The name OKIPRINTER and the IP address assigned to the OkiLAN 6120i are in the "/etc/hosts" file on the HP-UX system. TCP/IP OKI OkiLAN 6120i User's Guide IV - 63