Oki ML490 Network User's Guide for OkiLAN 6120i - Page 146
Hardware Error Messages
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Section 4 - Appendix A - Troubleshooting OkiNet for TCP/IP - Winsock Errors • If you see an error before OkiNet for TCP/IP appears on the screen, try setting a host name in the host's file in the Windows directory (check the documentation for your Windows TCP/IP stack). • If you have difficulty seeing a particular OkiLAN 6120i, try moving the device onto the same subnet as the computer running the utility. • If OkiNet for TCP/IP gives you the Winsock error: Could not bind to socket, use the Special Options dialog under the File menu to change the Discovery UDP Port to a different port number. Hardware Error Messages ST: Cable not connected Self-test has determined that the network cable is not connected. • Check the cable connection to the OkiLAN 6120i. • Move the OkiLAN 6120i to another known working node. If you find the cable is connected and you are still receiving this message or any other "ST:" error message, power cycle the OkiLAN 6120i. If the error continues, call Oki Data Customer Support at 1-800-OKI-DATA (1-800-654-3282). System CRC Failed The OkiLAN 6120i has failed. • Power cycle the OkiLAN 6120i once. If the error continues, call Oki Data Customer Support at 1-800-OKI-DATA (1-800-654-3282). TCP/IP OKI OkiLAN 6120i User's Guide IV - 53