Oki ML490 Network User's Guide for OkiLAN 6120i - Page 197
Using the Windows NT 4.0 LPR Print, Monitor
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Section 6 - Chapter 1 - OkiLAN 6120i Setup for Windows NT Note: To obtain a version of OkiLAN Connect for DLC that supports Windows NT, visit our FTP site (ftp://ftp.extendsys.com/pub/printserver/ utilities/) or contact Technical Support. Configure Port If you have printing problems while using the OkiLAN Connect printing port, you may check the status of the port by selecting Configure Port under the Ports tab in the Properties screen. Notify On Printer Error This feature will check the printer status prior to printing the job. If a printer error is detected (e.g. printer off-line or out of paper) the error description will be given. Notify When Printed This feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy. Description An optional field where you may list the location or other useful information about the printer port. Using the Windows NT 4.0 LPR Print Monitor A Microsoft LPR print monitor is shipped with Windows NT 4.0. This print monitor is not included in the default Windows NT installation; therefore, it will need to be installed. In order to set up an LPR printer in Windows NT 4.0, the system must have an IP address, the print server must have an IP address, and Microsoft TCP/IP printing must be installed. VI - 6 OKI OkiLAN 6120i User's Guide