Oki ML490 Network User's Guide for OkiLAN 6120i - Page 179

Section 5 - Chapter 2 - Installation Chapter 2 Installation Overview To install the OkiLAN 6120i: 1. Install the OkiNet for OS/2 utilities software. 2. Run the OkiNet for OS/2 utility to add a local printer port. 3. Associate a print queue with the new local printer port. Once the installation is complete, you can verify communication by printing a configuration sheet. Network Preparation • You must have network administrator privileges to install the OkiLAN 6120i. • You must have physical access to an OS/2 file server to host the OKI software utilities. • Write down the serial number and the Ethernet address of your OkiLAN 6120i. • OS/2 and LAN Manager/LAN Server must be configured with the following protocol: DLC/802.2 protocol stack • LAN Manager users must enable the remote boot facility. • LAN Server 2.X users must run the LAN Server installation utility and select the 802.2 protocol. • LAN Server 3.0 users must run the LAPS utility and select the 802.2 protocol. • OS/2 Warp Users must run the MPTS utility and select the 80w.w protocol. See your network administrator or the LAN Manager/LAN Server manuals for instructions. LAN Manager/ Server OKI OkiLAN 6120i User's Guide V - 5