Olympus DM 520 DM-420 Detailed Instructions (English) - Page 121
Troubleshooting
UPC - 807360860868
View all Olympus DM 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Alarm message list/Troubleshooting [Cannot play this file] File which cannot be played. [Please Select The File] [Same folder. Can't be moved(copied).] Unselected File File cannot be moved (copied). [Some files. Can't be File cannot be moved moved(copied).] (copied). [This file can't be divided.] File which cannot be split. Troubleshooting Incompatible format. Please confirm the file that can be played on this recorder. File is not selected. Please select a file then carry out the operation. Attempting to move (copy) Please select another into the same folder. folder. File in the destination with the same name, or file with DRM. Please select another file. Attempting to split a file besides the PCM files Please select another file. recorded in this recorder. Symptom Nothing appears on the display Won't start Unable to record No playback tone heard Recording level too low Probable cause Action The batteries are not loaded properly. Verify that the batteries' polarities = and - are correct (☞ P.14). Battery power is getting low. Replace with new batteries (☞ P.14). The power is off. Turn the power on (☞ P.18). Battery power is getting low. Replace with new batteries (☞ P.14). The power is off. Turn the power on (☞ P.18). The recorder is in HOLD mode. Release the recorder from HOLD (☞ P.19). Low remaining memory. Erase unnecessary files (☞ P.42). The maximum number of files has been reached. Change to the another folder (☞ P.24 to P.27). The earphone is connected. Unplug the earphones to use the internal speaker. The volume level is set to [00]. Adjust the volume level (☞ P.33). The recording level has not been adjusted. Adjust the recording level and then try recording once more (☞ P.47). Set the microphone sensitivity to The microphone sensitivity is too low. [High] or [Middle] mode and try again (☞ P.47). This could potentially be because the output level for the connected external devices are too low. Adjust the output level for the connected devices. Alarm message list/Troubleshooting 8 121