Olympus DM 520 DM-420 Detailed Instructions (English) - Page 15
Charging by connecting to a, computer via USB - case
UPC - 807360860868
View all Olympus DM 520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Power supply Power supply Notes Charging by connecting to a • Manganese batteries may not be used in this recorder. computer via USB • When changing batteries, AAA alkaline batteries or Olympus Ni-MH rechargeable batteries are recommended. • Be sure to stop the recorder before replacing the batteries. Unloading the batteries while the recorder is in use may corrupt the file. If you are recording into a file and the batteries run out, you will lose your currently recorded file because the file header will not be able to close. You can charge the batteries by connecting to a PC's USB port. When charging, be sure to correctly place the rechargeable batteries (supplied) into the recorder (☞ P.14). 1 Do not charge primary batteries such as alkali or lithium batteries. It may cause battery leakage heating and recorder malfunction. It is crucial to change the batteries once you see only one Hash mark in the battery indicator. 1 Boot the PC. • If it takes longer than 15 minute to replace the dead batteries or if you take the batteries in and out repeatedly at short 2 Connect the USB connection cable to the USB port of the PC. intervals, you may have to reset the time when you have loaded fresh batteries (☞ P.20). • Remove the batteries if you are not going to use the recorder for an extended period of time. 3 In the Stop or Hold status, connect the USB cable to the connecting terminal on the bottom of this recorder while pressing the STOP 4 button. • When playing a voice/music file, the recorder may be reset due to the reduction of the voltage output of the batteries depending on the volume level even if [8] is displayed in the battery indicator. In this case, lower the volume of the recorder. • [Batt.Charge mode] appears in the display while pressing the STOP 4 button. • Press and hold the STOP 4 button until [Charging] appears in the display. • When replacing rechargeable batteries, be sure to use Ni-MH rechargeable batteries. The use of other manufacturers' products can damage the recorder and should be avoided. 15