Panasonic AG-HVX200PJ Operating Instructions - Page 108
RECORDING SETUP screen continued, Display, Description of settings, TC REGEN, TC MODE, Camera
View all Panasonic AG-HVX200PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Setup menu list (continued) RECORDING SETUP screen (continued) Item 1394 TC REGEN P2 TAPE TC MODE P2 TAPE TCG P2 TAPE FIRST REC TC TAPE TC PRESET P2 TAPE Display mode Description of settings (MCR/ VCR) Selects the time code used for recording the signal from equipment connected to the 1394 terminal. ON: Records using the time code of the signal input through the 1394 terminal. OFF: Records using the time code set in TC MODE/TCG/FIRST REC TC. • If you select ON here, this has priority over the settings in TC MODE/TCG/ FIRST REC TC. • If there is no input to the 1394 terminal, the camera follows the settings in TC MODE/TCG/FIRST REC TC. (Camera) Selects the correction mode of the internal time code generator. (MCR/ DF: Uses the drop frame mode. VCR) NDF: Uses the non-drop frame mode. (DUB) • The non-drop frame mode will be used when you set recording frame rate of recording format to 24P, 24PA or 24PN. (Camera) Sets the mode in which you advance the time code. (MCR/ FREE RUN: VCR) The time code is advanced regardless of the operation mode. (DUB) Records in the dubbing mode in such a way that the time codes of the clips on the P2 card are carried over. User information is also carried over. • When setting a frame rate other than 24P during operation with the 720P/24PN format or other than 30P during operation with the 720P/30PN format, the FREE RUN operation for the time code will not be performed, and the REC RUN operation will be performed instead. REC RUN: The time code is advanced only when recording. (Camera) Selects the time code to be recorded when you start recording. (VCR) REGEN: (DUB) Regenerates the time code on the tape to continue recording. PRESET: The time code on the tape is not regenerated. The value you set in TC PRESET is used as the initial value to record the time code. However, if you perform subsequent shooting, the time code will always be regenerated. (Camera) Sets the initial time code. This is activated when you select PRESET in FIRST (MCR/ REC TC. VCR) • Set the frame value to 0 or a multiple of 5 when you set recording frame rate (DUB) of recording format to 24P, 24PA or 24PN. If any other value, the recorded time code will mis-match. indicates the factory setting. 108