Panasonic AG-HVX200PJ Operating Instructions - Page 118
Display, Description of settings, POWER SAVE, Camera, USER FILE, INITIAL, HOUR METER, OPERATION
View all Panasonic AG-HVX200PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Setup menu list (continued) OTHER FUNCTIONS screen (continued) Item POWER SAVE P2 TAPE USER FILE P2 TAPE HOUR METER TAPE OPERATION P2 Display mode Description of settings (Camera) Selects the power-saving mode when the top panel operation keys, DISP/ MODE CHK button, USER1-3 buttons and EVF DTL button have not been operated for 5 minutes or so. ON: The camera-recorder's power is set to OFF. OFF: The cylinder head remains stopped without turning off the camera-recorder's power. • When connection is made with an external device using the IEEE1394 cable and the communication mode is established in this way, the power will not be set off even when none of the above buttons has been operated. • The power will not be turned off when a P2 card or tape has not been installed in the P2 mode or TAPE mode, respectively, even if ON has been selected as this item's setting. (Camera) LOAD: (MCR/ The previous user file settings are loaded. VCR) SAVE: The changed user file settings are saved. INITIAL: The user file settings are returned to the factory settings. After performing LOAD or INITIAL, turn the POWER switch OFF and then back ON to activate the settings. • The setting for the TIME ZONE option (page 117) remains unchanged even when INITIAL is performed. (Camera) Displays the total running time (a 5-digit figure per hour) of the cylinder head. (VCR) (Camera) Displays the power-on time (a 5-digit figure). (MCR) indicates the factory setting. 118