Panasonic AG-HVX200PJ Operating Instructions - Page 116
OTHER FUNCTIONS screen continued, Display, Description of settings, END SEARCH, Camera, BLANK, REC END
View all Panasonic AG-HVX200PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Setup menu list (continued) OTHER FUNCTIONS screen (continued) Item END SEARCH TAPE PC MODE P2 REC LAMP P2 TAPE ACCESS LED P2 BEEP SOUND P2 TAPE CLOCK SET P2 TAPE Display mode Description of settings (Camera) Sets the operation when the END SEARCH button is pressed. (VCR) BLANK: Searches for the unrecorded parts on the tape. REC END: Searches for the last segment shot. (Camera) Selects the terminal for data transfer. (You cannot select USB and 1394 at the (MCR) same time.) USB DEVICE: Mode for sending files using the USB connector. 1394 DEVICE: Mode for sending files using the 1394 connector. 1394 HOST: Mode for copying files from the P2 card onto an external hard disk drive using the 1394 connector. (Camera) Sets lighting of the tally lamp. OFF: The tally lamp does not light. FRONT: Front tally lamp (microphone side) lights. REAR: Rear tally lamp (viewfinder side) lights. BOTH: Both tally lamps light. (Camera) Sets the access lamp to ON or OFF. (MCR) ON: The lamp lights up and blinks as per the regular specifications. OFF: The lamp is OFF in all circumstances. (Camera) Turns the beep sound ON or OFF. ON OFF When ON is selected, the beep is sounded under the circumstances set forth below. When the beep is sounded, the audio signals from the output connector are muted before the beep sound is output. • When the memory of the P2 card or the tape has been used up during recording • When a recordable tape has not been loaded when the power is turned on • When a recording-inhibited tape has been inserted • When condensation has formed inside the camera-recorder • When trouble has occurred in the camera-recorder When LIVE has been set for the HP MODE option on the AV IN/OUT SETUP screen, no beeping sounds will be emitted even if ON is set for the BEEP SOUND option. (Camera) Sets the camera-recorder's calendar. (MCR/ VCR) indicates the factory setting. 116