Panasonic AG-HVX200PJ Operating Instructions - Page 64

Basic playback operations (Tape) TAPE 2 Lock release 3 CAMERA MCR VCR PC DUB 1 P2 TAPE 1 Before turning the POWER switch to ON Set the MEDIA switch to the TAPE position. 2 Turn the POWER switch to ON. While pressing the lock release, turn the POWER switch to ON. 3 Press the mode button so the VCR lamp lights. The camera is now in the VCR mode. • Each time you press the button, the mode changes as below. VCR CAMERA When you press the mode button while VCR is selected, the unit enters the DUB (dubbing) mode. (Page 87) Operations using the OPERATION button Play ( ) While the tape is in the stop mode, the playback starts from where you stopped. During playback, the unit enters the variable speed search mode and starts x1-speed playback. (Page 74) No sound is heard during the playback. Fast-forward ( ) During playback, the fast-forward playback starts (at ten times normal speed). While the tape is in the stop mode, the unit starts fast-forwarding of tape. Remote Control /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V -V -V Rewind ( ) During playback, the rewind playback starts (at ten times normal speed). While the tape is in the stop mode, the unit starts rewinding of tape. /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V Stop ( ) /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX -V Pause ( ) Press again to return to playback. /REW PLAY FF/ STILL ADV PAUSE STILL ADV INDEX STOP INDEX Tape protection mode To protect the tape, this unit automatically switches to stop mode when five minutes elapse in the playback pause state or recording pause state. However, the time until stopping is shorter when in a playback pause state at low temperatures. 64