Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 11
FOCUS/ZOOM/IRIS ENABLE button [ENABLE], Focus, zoom and iris
View all Panasonic AW-RP150GJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Parts and their functions (continued) Focus, zoom and iris section IRIS TELE AUTO LOW HI SPEED ZOOM WIDE ENABLE AUTO OTAF LOW HI FOCUS SPEED FOCUS dial [FOCUS] Use this to manually control the focus. During auto focusing (when the auto focus button [] indicator is on), operation is disabled. Turned clockwise : The focus moves to the far end. Turned counterclockwise : The focus moves to the near end. zzWhen the [FOCUS DIR] item in the [PTZ INFO2] FUNCTION menu is set to "REVERSE", it is possible to change the relationship between the direction that the FOCUS dial is turned and the direction of the focus operation. Auto focus button [AUTO] Use this to set focus control to "Auto (auto focus)". During auto focusing, operation of the FOCUS dial () and one‑touch auto focus button () is disabled. Button indicator on : Auto focus Button indicator off : Manual focus One‑touch auto focus button [OTAF] When this button is pressed during manual focusing (when the auto focus button [] indicator is off), the button indicator turns on for a brief moment and the auto focusing operation is performed to bring the subject into focus. ZOOM SPEED dial [SPEED] Use this to adjust the operation variation amount for ZOOM button () operation. Turned clockwise : Operation is at a higher speed (HI) Turned counterclockwise : Operation is at a lower speed (LOW) zzWhen the ZOOM/FOCUS rocker on the PAN/TILT lever is allocated to ZOOM, operation is according to this setting. IRIS dial [IRIS] During manual iris (when the auto iris button [] indicator is off), use this to manually control the lens iris. During auto iris (when the auto iris button [] indicator is on), use this to adjust the convergence level of the auto iris of the remote camera. Turned clockwise : The lens iris opens. Turned counterclockwise : The lens iris closes. Auto iris button [AUTO] Use this to set lens iris control to "Auto (auto iris)". Button indicator on : Auto iris Button indicator off : Manual iris FOCUS/ZOOM/IRIS ENABLE button [ENABLE] Use this to enable or disable operation of the FOCUS dial (), ZOOM button () and IRIS dial (). Button indicator on : Operation of the FOCUS dial, ZOOM button and IRIS dial is enabled. Button indicator off : Operation of the FOCUS dial, ZOOM button and IRIS dial is disabled. FOCUS SPEED dial [SPEED] Use this to adjust the operation variation amount for FOCUS dial () operation. Turned clockwise : Operation is at a higher speed (HI) Turned counterclockwise : Operation is at a lower speed (LOW) zzWhen the ZOOM/FOCUS rocker on the PAN/TILT lever is allocated to FOCUS, operation is according to this setting. ZOOM button [ZOOM] Use this to adjust the lens zoom. The zooming speed changes depending on the extent to which the button is pressed. When the TELE side is pressed : Moves toward the telephoto end. When the WIDE side is pressed : Moves toward the wide‑angle end. zzWhen the [ZOOM DIR] item in the [PTZ INFO2] FUNCTION menu is set to "REVERSE", it is possible to change the relationship between the direction that the ZOOM button is pushed and the direction of the zoom operation of the lens. Note zzWhen turning on the power, do not touch until the status screen is displayed on the LCD panel. 11