Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 24

Selecting a remote camera, Camera status indicator lighting statuses and remote camera statuses

Get Panasonic AW-RP150GJ PDF manuals and user guides View all Panasonic AW-RP150GJ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Selecting a remote camera When the mode selection button [SELECT] indicator is off, you can press a camera selection button [CAMERA / GROUP SELECTION] to select the remote camera to control. When a camera selection button is pressed, the indicator of the pressed button turns on and the remote camera is selected. Also, you can determine the statuses of the remote cameras assigned to camera selection buttons 1 to 10 from the lighting statuses of the indicators (camera status indicators) above the buttons. zzCamera status indicator lighting statuses and remote camera statuses Indicator lighting status Remote camera status Off zzThe connection type of the corresponding camera number is set to "NON". zzPower is not being supplied to the remote camera. On (orange) The remote camera is in the standby state. Turn the power on as described in "How to turn on the power of the remote cameras" (page 21). On (green) The unit is connected to the remote camera. On (red) An alarm is being received from the applicable remote camera. Connection between unit and remote camera IP connection/ serial connection IP connection/ serial connection IP connection/ serial connection IP connection/ serial connection About camera selection buttons and camera status indicator displays zzCamera status indicators Lighting state of the indicator Remote camera state Off Not connected On (amber) Camera standby On (green) zzCamera connected zzMultiple AW-RP150s connected to the camera zzCamera selection buttons Lighting state of the indicator Off Unselected Remote camera state On (green) G_TALLY ON (camera not selected) On (red) R_TALLY ON (camera not selected) On (amber) Selected zzThe camera changes to this status if it is a camera with R/G_TALLY ON. zzThe TALLY of the selected camera is displayed on the LCD panel. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
24
Selecting a remote camera
When the mode selection button [SELECT] indicator is off, you can press a camera selection button [CAMERA / GROUP SELECTION] to select the
remote camera to control.
When a camera selection button is pressed, the indicator of the pressed button turns on and the remote camera is selected.
Also, you can determine the statuses of the remote cameras assigned to camera selection buttons 1 to 10 from the lighting statuses of the indicators
(camera status indicators) above the buttons.
z
Camera status indicator lighting statuses and remote camera statuses
Indicator lighting
status
Remote camera status
Connection between unit
and remote camera
Off
z
The connection type of the corresponding camera number is set to “NON”.
z
Power is not being supplied to the remote camera.
IP connection/
serial connection
On
(orange)
The remote camera is in the standby state.
Turn the power on as described in “How to turn on the power of the remote cameras”
(page 21).
IP connection/
serial connection
On
(green)
The unit is connected to the remote camera.
IP connection/
serial connection
On
(red)
An alarm is being received from the applicable remote camera.
IP connection/
serial connection
About camera selection buttons and camera status indicator displays
z
Camera status indicators
Lighting state of
the indicator
Remote camera state
Off
Not connected
On (amber)
Camera standby
On (green)
z
Camera connected
z
Multiple AW‑RP150s connected to the camera
z
Camera selection buttons
Lighting state of
the indicator
Remote camera state
Off
Unselected
On (green)
G_TALLY ON (camera not selected)
On (red)
R_TALLY ON (camera not selected)
On (amber)
Selected
z
The camera changes to this status if it is a camera with R/G_TALLY ON.
z
The TALLY of the selected camera is displayed on the LCD panel.