Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 12

Parts and their functions (continued) Color adjustment section  AWB BARS ABB    A/3200K B/5600K ATWVAR WHITE BAL SHUTTER ON SHUTTER SYNC SCENE ON/OFF R/B GAIN ENABLE R/B PED M.PED     BARS button [BARS] Use this to select the video signal output from the remote camera. Each press switches between the "signal for the images shot by the camera" and the "color bar signal". Button indicator off : Outputs the signal for the images shot by the camera Button indicator on : Outputs the color bar signal  AWB button [AWB] Use this to execute automatic adjustment of the white balance and then register the adjustment result to memory A or B of the remote camera. The AWB button indicator turns on during white balance adjustment and turns off when adjustment is successful. When adjustment was not possible, the indicator turns off. zzWhen automatic adjustment of the white balance ends, the R GAIN and B GAIN values become ±0. zzIf the AWB button is pressed when the color bar signal is output from the remote camera (when the BARS button () indicator is on) or when ATW is selected (when the ATW/VAR button () indicator is on), the adjustment is not made and the button indicator turns on. zzWhen adjustment was not possible, try changing, for example, the light source, lens iris, and subject, and then perform adjustment again.  ABB button [ABB] Use this to execute automatic adjustment of the black balance. When the button is pressed, adjustment is performed by automatically closing the iris. The ABB button indicator blinks during black balance adjustment and turns off when adjustment is successful. When adjustment was not possible, the indicator turns on and the black balance setting does not change. zzWhen adjustment was not possible, check the camera and lens cable connections, and then perform adjustment again.  WHITE BAL A/3200K, B/5600K, ATW/VAR buttons [WHITE BAL A/3200K, B/5600K, ATW/VAR] Use these to select the white balance mode of the remote camera. A/3200K : zzPress the A/3200K button to switch to the white balance state registered in memory A of the remote camera and to turn on the A/3200K button indicator in amber. Pressing the AWB button () after the A/3200K button automatically adjusts the white balance and registers the adjustment result to memory A of the camera. zzHolding down the A/3200K button sets the color temperature to 3200K and to turn on the A/3200K button indicator in green. B/5600K : zzPress the B/5600K button to switch to the white balance state registered in memory B of the remote camera and to turn on the B/5600K button indicator in amber. Pressing the AWB button () after the B/5600K button automatically adjusts the white balance and registers the adjustment result to memory B of the camera. zzHolding down the B/5600K button sets the color temperature to 5600K and to turn on the B/5600K button indicator in green. ATW/VAR: zzPress the ATW/VAR button to switch to the auto tracking white balance (ATW) mode for automatically tracking the white balance in accordance with the lighting conditions and to turn on the ATW/VAR button indicator in amber. zzHolding down the ATW/VAR button sets the color temperature to one set in the menu and to turn on the ATW/VAR button indicator in green.  SHUTTER ON button [SHUTTER ON] Button indicator on : Shutter is enabled. Button indicator off : Shutter is disabled. zzRefer to the operating instructions for the remote camera being connected for setting value ranges.  SHUTTER SYNC button [SHUTTER SYNC] Button indicator on : Sync shutter is set. Button indicator off : Step shutter is set. zzRefer to the operating instructions for the remote camera being connected for setting value ranges.  SCENE ON/OFF button [SCENE ON/OFF] This is a button for a future expansion feature. Currently it is constantly on.  M.PED dial [M.PED] Use this to adjust the master pedestal. Turned clockwise : Displays the setting value of the master pedestal on the LCD panel and changes the value in the plus (+) direction. Turned counterclockwise : Displays the setting value of the master pedestal on the LCD panel and changes the value in the minus (-) direction. zzRefer to the operating instructions for the remote camera being connected for setting value ranges. 12