Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 80
Start, Remaind, Data Save, Data Load, Recall, 0m00s, Pre10
View all Panasonic AW-RP150GJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Menu (continued) TMEM zzThe setting values will vary depending on the connected camera. CAM01 : AW-UE150 1 PMEM LIST 6 SETTING 2 PMEM DIRECT 3 PMEM STORE 4 PMEM DEL 1 / 1 5 TMEM 1 MODE RECALL START NO? TMEM 1 Remaind 5m00s 2 1 PRE1 2 PRE2 3 PRE3 4 PRE4 3 5 PRE5 6 PRE6 7 PRE7 8 PRE8 11 4 9 PRE9 10 PRE10 5 TIME 0m00s DATA SAVE DATA LOAD NO? NO? Item MODE START TMEM Remaind 1 ⁞ 10 TIME DATA SAVE DATA LOAD ___ indicates factory default settings. Setting value STORE RECALL DEL RESTORE NO? YES? (Only when [MODE] is [STORE]) 1 ⁞ 100 5m00s - 0m00s NO? YES? NO? YES? Setting details Select the operation to perform on tracing memory. STORE: Register tracing memory. RECALL: Play back tracing memory. DEL: Delete tracing memory. RESTORE: Edit the registered tracing memory. When [STORE] is selected in [MODE], select [YES?] and press the F2 dial to start registration of the tracing memory. The currently selected tracing memory number is displayed. The length of time it is possible to save for the tracing memory is displayed. Select to register, playback, delete, and edit tracing memory. The selected number operates according to the [MODE]. Numbers in yellow are numbers for which tracing memory has been registered. The time required for registration of the currently selected tracing memory is displayed. The setting is 0m00s when not registered. The tracing memory data is stored to the memory card. The data for all of the tracing memories stored in the unit will be saved as a single file to the memory card. zzDo not turn off the power of the unit or remove the memory card until this process is complete. The tracing memory data is loaded from the memory card. The screen switches to the one for selecting files when you select "YES?". Turn the F1 dial to select the file, then press the F1 dial to load it. zzDo not turn off the power of the unit or remove the memory card until this process is complete. zzWhen performing tracing memory operations, do not operate from more than one AW-RP150. If tracing memory operations are performed on the same remote camera from more than one AW-RP150, operation will not be correct. 80