Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 69
System, Unlock
View all Panasonic AW-RP150GJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Menu (continued) SYSTEM ⇒ "CAMERA" (page 69) ⇒ "CONNECT SETTING" (page 70) ⇒ "MANUAL IP SET" (page 71) ⇒ "AUTO IP SET" (page 72) ⇒ "RP IP SET" (page 73) ⇒ "TRACKING" (page 74) CAMERA zzThe setting values will vary depending on the connected camera. CAM01 : AW-UE150 1 CAMERA 6 2 CONNECT SETTING TRACKING 3 MANUAL IP SET 4 AUTO IP SET 1 CAM POWER AUTO POWER CAM LOCK NON ON UNLOCK 1 / 1 5 RP IP SET 11 ___ indicates factory default settings. Item CAM POWER AUTO POWER*1 CAM LOCK Setting value NON GRP OFF GRP ON ALL OFF ALL ON OFF ON UNLOCK LOCK Setting details Execute power On/Off instructions in regard to connected remote cameras. NON: Power On/Off instructions not executed. GRP OFF: Execute power Off (standby) instructions in regard to remote cameras belonging to the currently selected camera group. GRP ON: Execute power On instructions in regard to remote cameras belonging to the currently selected camera group. ALL OFF: Execute power Off (standby) instructions in regard to remote cameras set in this unit. ALL ON: Execute power On instructions in regard to remote cameras set in this unit. zzDepending on the number of remote cameras connected, the unit may take some time before it can be operated. The power of remote cameras set in the unit turns on when the power of this unit is turned on. zzDepending on the number of remote cameras connected, the unit may take some time before it can be operated. This feature is available when connected to AW-UE150 via LAN. When "LOCK" is selected, this unit and currently selected remote cameras cannot be controlled from another AW-RP150. While LOCK is on, currently selected remote cameras can only be controlled from the AW-RP150 on which LOCK was executed. Note that if you switch to another remote camera while LOCK is on, the LOCK is maintained on the remote cameras prior to camera selection, but the remote cameras after camera selection do not have LOCK applied. A key mark is displayed next to the camera name at the TOP of the LCD panel while LOCK is on. When "UNLOCK" is selected, the LOCK is released and the key mark disappears. Green key mark: This means that LOCK has been executed on this unit. Red key mark: This means that another AW-RP150 has been used for LOCK. Operation is not possible in this case. *1: This item is saved to the memory card by MAINTENANCE > RP SETTING > DATA SAVE. 69