Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 35

Settings for connecting with the remote cameras (continued) When introducing additional remote cameras into an environment in which IP connections are already in use The settings can be configured using "auto IP setting" even when introducing additional remote cameras into an environment in which IP connections are already in use. There are the following two methods. 1. Automatically changing the IP address set on the additional device to be introduced from the unit 2. L eaving the IP addresses of the additional devices to be introduced unchanged and automatically updating the connection destination IP addresses set on the unit Remote camera A Remote camera B 192.168.0.10  192.168.0.13 Remote camera C Remote camera D CAM4 Connection destination IP address of CAM4 192.168.0.13 „„Automatically changing the IP address set on the additional device to be introduced from the unit By executing "RENEW" in the "AUTO SET" item of the "AUTO IP SET" SYSTEM menu, links are set. With "RENEW", the unit first searches within the same subnet. Then, links are set between the newly detected remote cameras and camera numbers for which the connection type is set to "NON" on the unit. At that time, the IP addresses of the remote cameras are overwritten with the connection destination IP address values set on the unit. Example: (1) O peration is being performed with the three remote cameras A, B and C set to CAM1, CAM2 and CAM3, respectively. (2) The new remote camera D (with the following IP address value) is added. Remote camera D : 192.168.0.10 (3) C onnection types set on the unit ([SYSTEM] button > [CONNECT SETTING]) CAM1 : LAN CAM2 : LAN CAM3 : LAN CAM4 : NON (4) C onnection destination IP address set on the unit ([SYSTEM] button > [MANUAL IP SET]) CAM4 : 192.168.0.13 When "RENEW" is executed in this state, the IP address of remote camera D is overwritten with the following value, and a link is set to the camera number CAM4. Remote camera D : 192.168.0.13 zzWhen you connect a remote camera for which the IP address has been changed using a personal computer or other device after a link was set to the unit with auto IP setting and then execute "RENEW", the same IP address as was set when auto IP setting was executed the first time is set again for the corresponding camera. 1. Connect the additional remote cameras to be introduced and the unit to the network within the same subnet. 2. Select the "AUTO IP SET" SYSTEM menu, turn the F1 dial to display "RENEW", then press the F1 dial. CAM01 : AW-UE150 1 CAMERA 6 2 CONNECT SETTING TRACKING 3 MANUAL IP SET 4 AUTO IP SET 1 / 1 5 RP IP SET 1 AUTO SET NON NEW 0 TOTAL 0 EXEC NON 11 The number of devices currently being managed by the unit (All remote cameras and the newly detected number of devices are displayed in "NEW" and "TOTAL".) NEW : Newly detected cameras TOTAL : The number of devices currently being managed by the unit + Number of newly detected devices 35