Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 96

G Sdi Active Thru Out, Serial Cont 1 To 5 Rj-45, Ip Cont Rj-45, In Dc 12 V, 3g Sdi

Get Panasonic AW-RP150GJ PDF manuals and user guides View all Panasonic AW-RP150GJ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

Control interface for external devices (continued) 3. 3G SDI ACTIVE THRU OUT BNC 75 Ω The HD/SDI signals input through SDI IN are output as they are. zzSignals are not output unless the power of this unit is on. 4. 3G SDI IN BNC 75 Ω When the [PICTURE] button is lit, the input video is displayed on the LCD panel. 5. SERIAL CONT 1 to 5 (RJ-45) Connect remote cameras with support for a serial connection to these connectors using LAN cables. Connect them with straight cables (category 5e or better shielded cable). Pin number 1 2 3 4 5 6 7 8 Signal name GND TALLY TXD - RXD - RXD+ TXD+ NC NC Description of signal Frame ground Tally output (open collector) Send data (-) Receive data (-) Receive data (+) Send data (+) Not used Not used zzTALLY (pin number: 2) specifications Voltage withstand: Max. 24 V DC Current: Max. 50 mA 6. IP CONT (RJ-45) Complies with 10BASE-T/100BASE-TX. Allowing connection to a network device that supports the PoE+ standard (IEEE802.3at compliant). 7. 12V IN (DC 12 V) Hirose Electric: HA16RA-4P (77) Accepts DC 12V inputs from an external power supply. Input voltage range: 10.8 V to 13.2 V Pin No. Function 1 1 2 2 3 4 3 GND NC NC 4 +12V 96

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
96
Control interface for external devices
(continued)
3°
3G SDI ACTIVE THRU OUT
BNC 75 Ω
The HD/SDI signals input through SDI IN are output as they are.
z
Signals are not output unless the power of this unit is on.
4°
3G SDI IN
BNC 75 Ω
When the [PICTURE] button is lit, the input video is displayed on the
LCD panel.
5°
SERIAL CONT 1 to 5 (RJ-45)
Connect remote cameras with support for a serial connection to these
connectors using LAN cables.
Connect them with straight cables (category 5e or better shielded cable).
Pin
number
Signal name
Description of signal
1
GND
Frame ground
2
TALLY
Tally output (open collector)
3
TXD –
Send data (–)
4
RXD –
Receive data (–)
5
RXD+
Receive data (+)
6
TXD+
Send data (+)
7
NC
Not used
8
NC
Not used
z
TALLY (pin number: 2) specifications
Voltage withstand: Max. 24 V DC
Current: Max. 50 mA
6°
IP CONT (RJ-45)
Complies with 10BASE‑T/100BASE‑TX.
Allowing connection to a network device that supports the PoE+
standard (IEEE802.3at compliant).
7°
12V
IN (DC 12 V)
Hirose Electric: HA16RA‑4P (77)
Accepts DC 12V inputs from an external power supply.
Input voltage range: 10.8 V to 13.2 V
1
2
3
4
Pin No.
Function
1
GND
2
NC
3
NC
4
+12V