Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 53
Spd Wth Z, Z Min Spd, Freeze, Lmt Up, Lmt Down, Lmt Left, Lmt Right, P / T Curve, Focus/iris, Assign
View all Panasonic AW-RP150GJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Menu (continued) PTZ INFO1 zzThe setting values will vary depending on the connected camera. CAM01 : AW-UE150 1 USER ASSIGN 6 CROP 2 CAMERA INFO 3 PTZ INFO1 4 PTZ INFO2 1 / 1 5 HOUSING INFO 1 SPD WTH Z ON Z MIN SPD OFF FREEZE OFF 2 LMOTFFUP LMTODFOFWN LMTOFLFEFT LMTORFIFGHT 3 P / T CURVE FOCUS/IRIS 1 STANDARD 11 Item SPD WTH Z Z MIN SPD*1 FREEZE LMT UP LMT DOWN LMT LEFT LMT RIGHT P/T CURVE*1 Setting details Enable (on) or disable (off) the function used to adjust the pan-tilt adjustment speed in conjunction with the zoom magnification. When [ON] is set, the panning and tilting operations will become slower in the zoom status. Calibrate the amount of zoom control sent from the unit so that lens zooming starts smoothly when the ZOOM button is pressed in slowly. Watch the images on the monitor to see if lens zooming starts smoothly when the ZOOM button is pressed in slowly. Calibration starts at "1", the least amount, to "8", the most. There is no calibration when [OFF] is selected. Enable (on) or disable (off) the function for freezing images during preset playback. When this is set to [ON], preset playback is performed with a still of the image immediately preceding the start of preset playback being output. The image freeze is released when preset playback is finished. You can set the limiter of the remote camera in the direction of the upper limit from this unit. You can set the limiter of the remote camera in the direction of the lower limit from this unit. You can set the limiter of the remote camera in the direction of the left limit from this unit. You can set the limiter of the remote camera in the direction of the right limit from this unit. You can adjust the relationship between the angle and operation speed when the PAN/TILT lever is tilted. Operating speed P/T CURV=1 P/T CURV=5 Angle of lever FOCUS/IRIS*1 You can switch the operations of the FOCUS dial and the IRIS dial. EXCHANGE: Switches the operations of the FOCUS dial and the IRIS dial. The operations of the auto focus button and the auto iris button are also switched when [EXCHANGE] is selected. zzThe one-touch auto focus button is disabled. zzOperation of the FOCUS SPEED dial is disabled. zzSpeed is fixed to the setting it was at the time the setting is changed to [EXCHANGE]. STANDARD: Reverts the operations of the FOCUS dial and the IRIS dial. *1: This item is saved to the memory card by MAINTENANCE > RP SETTING > DATA SAVE. 53