Panasonic AW-RP150GJ AW-RP150 Operation Manual - Operating Instructions - Page 34

Settings for connecting with the remote cameras (continued) 192.168.0.10  192.168.0.11 192.168.0.10  192.168.0.10 Remote camera A Remote camera B CAM1 CAM2 CAM3 192.168.0.10  192.168.0.12 Remote camera C Unit 192.168.0.9 3. Turn the "EXEC" (F4 dial) to select "SETTING", then press the F4 dial. "Auto IP setting" starts. The "AUTO IP SETTING" message is displayed while "auto IP setting" is being performed. zzThe "COMPLETE" message is displayed when the entire process is successful. The remote cameras automatically reboot and restart with the newly configured IP addresses. The remote cameras can now be operated from the unit. zzThe "SET UP ERR" message is displayed when IP address setting fails. The cause of the problem is likely to be a network malfunction. Check the connection status of the hub and LAN cables, and then retry the "auto IP setting" operation. zzFor the camera numbers for which "auto IP setting" is executed, the connection type becomes "LAN" and the camera numbers are excluded from the setting targets the next time "auto IP setting" is executed. Note zzBefore configuring the settings, check that the connection types of the remote cameras are "NON". Connection type settings SYSTEM menu → CONNECT SETTING → "CAM1" to "CAM200" items 1. Connect the remote cameras and unit to the network within the same subnet. 2. Select the SYSTEM menu [AUTO IP SET], turn the F1 dial to set the "AUTO SET" item to "RENEW", then press the F1 dial. CAM01 : AW-UE150 1 CAMERA 6 2 CONNECT SETTING TRACKING 3 MANUAL IP SET 4 AUTO IP SET 1 / 1 5 RP IP SET 1 AUTO SET NON NEW 0 TOTAL 0 EXEC NON 11 The number of devices currently being managed by the unit (All remote cameras and the newly detected number of devices are displayed in "NEW" and "TOTAL".) NEW : Newly detected cameras TOTAL : The number of devices currently being managed by the unit + Number of newly detected devices 34