Panasonic KXTG5212 KXTG5210 User Guide - Page 17

Programmable Settings Preparation Telephone System Answering System Useful Information Date and Time Handset We recommend you set the date and time so that the unit will announce the day and time each message was recorded when you play back messages. 1 Press [MENU]. 2 Scroll to "Date and time" by pressing [d] or [B], then press the soft key ( SELECT ). B Date and time d BACK P LAY SELECT 3 (1) Enter 2 digits each for the month, day and year. (Ex. To set May 15, 2004, enter "05 15 04".) (2) Enter 4 digits for the time (hour and minute). (Ex. To set 9:30, enter "0930".) • If you enter a wrong number, press the soft key ( f ) or ( g ), or press [B] or [d] to move the cursor to the incorrect number. Enter the correct number. 4 Select "AM" or "PM" by pressing [*]. Date:1|2.31.2004 Time:12:00 AM 0-9=Date&Time @=AM/PM f g SAVE Date:|05.15.2004 Time:09:30 AM 0-9=Date&Time @=AM/PM f g SAVE 5 Press the soft key ( SAVE ). • The date and time are set and "E" disappears from the base unit display. • If the handset beeps 3 times, the date and time were not set correctly. Start again from step 3. 6 Press [OFF]. • When entering the time, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter "0100", and select "PM" in step 4.) The date and time may be incorrect after a power failure. When "E" flashes on the base unit display, set the date and time again. To confirm the date and time, repeat steps 1 and 2. • The current date and time are displayed. When finished, press [OFF]. For Caller ID service users (p. 30) • When a call is received, Caller ID information adjusts the date and time if the time is incorrect. • Caller ID information will automatically adjust the date and time for daylight saving time. • If the date and time have not been previously set, Caller ID information will not adjust the date and time. For assistance, please call: 1-800-211-PANA(7262) 17