Panasonic KXTG5212 KXTG5210 User Guide - Page 76
General, Recharge battery, Charge for 6 HRS, Charge, for 6 HRS
View all Panasonic KXTG5212 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Troubleshooting General Problem Cause & Remedy The handset and/or base unit does not work. • Check the settings (p. 12-14). • Check whether the dialing mode setting is correct (p. 18). • Fully charge the battery (p. 13). • Clean the charge contacts and charge again (p. 14). • Check battery installation (p. 13). • Unplug the base unit's AC adaptor to reset it. Plug in, and try again. • The handset has not been registered to the base unit. Register the handset (p. 70, steps 5 and 6). • Re-install the battery (p. 13) and fully charge it. "Recharge battery" is displayed, "3" flashes, or the handset beeps intermittently. • Fully charge the battery (p. 13). "Charge for 6 HRS" and "4" are displayed and the handset does not work. • The battery has been discharged. Fully charge the battery (p. 14). You charged the battery fully, but "Recharge battery" is still displayed and/or "3" continues to flash, or "Charge for 6 HRS" and "4" are displayed. • Clean the charge contacts and charge again (p. 14). • The battery may need to be replaced. If you install a new battery, fully charge it (p. 13, 14). The CHARGE indicator does not go out after the battery has been charged. • This is normal. If you cannot solve your problem • Visit our website: http://www.panasonic.com/support • Contact us via the web at: http://www.panasonic.com/contactinfo • Call our customer call center at: 1-800-211-PANA(7262) 76