Panasonic PVDV953D Digital Video Camera - Page 36
Vcr Mode, Playing Back, Finding A Scene You Want To Play Back
View all Panasonic PVDV953D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 SHUTTER/IRIS/ VOL/JOG PUSH 1 CAMERA VCR CARD P.B. 1 O FF ON MODE SEARCH 2 3 3 WEB CAMERA 2 2 SEARCH 2 SHUTTER/IRIS/ VOL/JOG PUSH SEARCH 1 1 A B C D R 36 VCR Mode Playing Back The recorded scene can be played back immediately after recording. 1 Rotate the [OFF/ON/MODE] Switch and set the Palmcorder in the VCR Mode. ≥The [VCR] Lamp lights up. 1 2 Press the [6] Button to rewind the tape. ≥Rewind the tape to the point where you want to start playback. ≥When the tape reaches the beginning, rewinding stops automatically. 3 Press the [1] Button to start playback. To Stop Playback Press the [∫] Button 2. ≥If a cassette recorded with copyright protection signals is played back, the screen becomes blue or mosaic-like noise patterns appear. ª Adjusting the Sound Volume Until the [VOLUME] Indication 3 appears, keep pressing the [PUSH] Dial 4. Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment, press the [PUSH] Dial to make the [VOLUME] Indication disappear. To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off 2 or 3 seconds after the adjustment is finished. ≥When the Playback Zoom Function is in use, the sound volume cannot be adjusted. ≥For other notes, see page 69. Finding a Scene You Want to Play Back ª Cue/Review Playback Cue Playback A Press the [5] Button 1 during playback. Review Playback B Press the [6] Button 2 during playback. ≥If the Button is held continuously, it remains as Cue Playback or Review Playback until you release it. ª Hyper Check Function If you press the [5] Button during fast-forwarding of the tape or the [6] Button during rewinding of the tape, Cue Playback or Review Playback continues for as long as the Button is held down. ª Variable Speed Search Function The speed of Cue Playback or Review Playback can be varied. 1 During playback, press the [1] Button. ≥[1k!] Indication appears. C 2 Rotate the [PUSH] Dial and select a desired search speed. The following 6 playback speeds are available for the Variable Speed Search Function in both the fast-forwarding and rewinding directions. 1/5k (slow playback, SP mode only), 1/3k (slow playback, LP mode only),1k, 2k, 5k, 10k, and 20k. ≥The same setting can be performed using the Remote Controller's [VAR.SEARCH] Button, the [π] Button and the [∫] Button. Resuming Normal Playback Press the [1] Button. ≥During Cue or Review Playback, fast-moving images may show mosaic-like noise patterns. This is not a malfunction. ≥The sound is muted during search. ≥The Variable Speed Search feature is not available when the Repeat playback is active. ª Repeat Playback If you hold down the [1] Button for 5 seconds or longer, the Palmcorder switches to Repeat Playback Mode, and the [R !] Indication appears D. (To cancel Repeat Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)