Panasonic PVDV953D Digital Video Camera - Page 81
Problems, Solutions, Cue, Review or Slow Motion Playback.
View all Panasonic PVDV953D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
If you are experiencing one of the following problems with your Digital Palmcorder, it may be something you can correct yourself. Check the list below for Problems and Solutions. Problems Solutions Video cannot be played back even when the [1] Button is pressed. Is the [VCR] Lamp on? If the [VCR] Lamp is not on, the playback function cannot be used. Mosaic-like noise patterns appear on images during Cue, Review or Slow Motion Playback. This phenomenon is characteristic of digital video systems. It is not a malfunction. Although the Palmcorder is correctly connected to a TV, playback images cannot be seen. Have you selected Video Input on the TV? Please read the operating instructions of your TV and select the input that matches the input jacks used for the connection. Playback image is not clear. Are the heads of the Palmcorder dirty? If the heads are dirty, playback image will not be clear. No sound is played back from the built-in speaker or headphones of the Palmcorder. Is the volume too low? During playback, continue pressing the [PUSH] Dial until the [VOLUME] Indication appears. Then, rotate the [PUSH] Dial to adjust the volume. Different sounds are reproduced at the same time. [12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu of the [VCR FUNCTIONS] Main-Menu has been set to [MIX]. As a result, the original sound and sound that was recorded by audio dubbing are played back together. It is possible to reproduce the sounds separately. The original sound was erased when audio dubbing was performed. Sounds cannot be played back. If you perform audio dubbing on a recording done in [16bit] Mode, the original sound will be erased. If you want to preserve the original sound, be sure to select [12bit] Mode at the time of recording. ≥Although a Cassette with no audio dubbing is being played, is [12bit AUDIO] on the [PLAYBACK FUNCTIONS] SubMenu of the [VCR FUNCTIONS] Main-Menu set to [ST2]? To play back a Cassette with no audio dubbing, [12bit AUDIO] must be set to [ST1]. ≥Is the Variable Speed Search Function working? Press the [1] Button to cancel the Variable Speed Search Function. The recorded picture on the Memory Card is not clear. Card PhotoShot playback pictures do not look normal. Even if a Card is formatted, it cannot be used. Do you have [PICTURE QUALITY] on the [CARD SETUP] Sub-Menu set to [NORMAL] or [ECONOMY]? If recording is made when it is set to [NORMAL] or [ECONOMY], a detailed image may show a mosaic pattern. Set the [PICTURE QUALITY] to [FINE]. (l 43) There is a possibility that the images are damaged. To prevent the loss of image data, we recommend that you back images up on a Cassette or personal computer. (l 46, 53) There is a possibility of damage to either the Palmcorder or the Card. Please contact Panasonic Call Centre. 81