Panasonic PVDV953D Digital Video Camera - Page 42
Special Features, Using A Memory Card, Recording On The Memory Card
View all Panasonic PVDV953D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
1 A2 1 3 3 MENU 5 PHOTO SHOT SHUTTER/IRIS/ VOL/JOG PUSH TAPE CARD 1, 2 CARD MODE 1 2 F 7 640 PICTURE 4 3 MPEG4 45 VOICE 6 Special Features Using a Memory Card An SD Memory Card or MultiMediaCard can be used to record files or play back files. ≥Use a genuine SD Memory Card or MultiMediaCard manufactured by Panasonic only. ª Inserting a Memory Card Before inserting a Memory Card, be sure to turn off the Palmcorder. 1 Open the Card Slot Cover. 2 While holding the Memory Card with its cut corner A facing right, insert it into the Card Slot. 3 Close the Card Slot Cover securely. ª Removing the Memory Card Open the Card Slot Cover, press the center of the Card and then pull it straight out. ≥After removing the Card, close the Card Slot Cover. ≥The Palmcorder or the Card may be damaged if the Card is forced out when the Card is fully inserted. ª [ACCESS] Lamp While the Palmcorder is accessing the Card (reading, recording, playback, erasing, moving of images), the [ACCESS] Lamp 1 lights up. ≥While the [ACCESS] Lamp is on, never attempt to: pull out the Card, to turn off the Palmcorder power, or switch the [TAPE/CARD/CARD MODE] Selector. Such actions will damage the Card and cause the Palmcorder to malfunction. Recording on the Memory Card 3 kinds of data can be recorded by selecting with the [TAPE/CARD/ CARD MODE] Selector. When recording a still picture, slide the [TAPE/ CARD/CARD MODE] Selector until the [PICTURE] Indication 1 appears (Card PhotoShot), when recording a moving picture, slide the [TAPE/CARD/ CARD MODE] Selector until the [MPEG4] Indication 2 appears (MPEG4 Recording), when recording voice, slide the [TAPE/CARD/CARD MODE] Selector until the [VOICE] Indication 3 appears (Voice Recording). ≥For other notes, see page 70. ª Card PhotoShot Still pictures can be recorded on the Memory Card from the Palmcorder lens as well as from scenes that have already been recorded on a cassette. The size of images that are recorded using this Palmcorder is approximately 3,000,000 pixels. Recording of images with a size that is larger than a million pixels is called mega-pixel still-picture recording. Compared to images of normal recording, images that are created by mega-pixel still-picture recording can be printed out more clearly. Recording from the Palmcorder Lens (CAMERA Mode) 1 Slide the [TAPE/CARD/CARD MODE] Selector to [CARD]. 2 Slide the [TAPE/CARD/CARD MODE] Selector to [CARD MODE] until the [PICTURE] Indication appears. ≥Remaining Number of Card PhotoShot pictures 4. 3 Set [CAMERA FUNCTIONS] >> [CARD SETUP] >> [PICTURE SIZE] >> [2048t1496] or [640t480]. 4 Center the subject in the focus area 5 on the screen. ≥In Auto Focus Mode, the focus indication 6 is lit when the subject is in focus. (Green: in focus, White: roughly in focus) 5 Press the [PHOTO SHOT] Button. ≥The [ PICTURE ] Indication will light in red. ≥For other notes, see page 70. Concerning Low Light Shot When recording dark scenes, set the [LOW LIGHT SHOT] of the [CARD SETUP] Sub-Menu to [AUTO]. (When the shutter speed is 1/30, Low Light Shot is activated, and the [4CARD] Indication appears.) ≥When [AUTO] is set for Low Light Shot, the brightness of the moving picture may suddenly be changed depending on the scene to be shot. 42