Pfaff creative 7570 Owner's Manual - Page 133

I23 : 46 Jfi - - - - -- vv . hi; L The second bartuck can be self-defined using The stitch density of the second purl seam can be key "6' set using the balance. The stitch density cannot be altered for this button Caution: Before starting the buttonhole, pull hole type. Therefore you should use a stronger buttonhole foot No. 5 A forwards up to the thread or gimp thread if necessary (see "Button second red markl j hole with gimp thread). 1."y' 4, Keyhole buttonholes Important' The keyhole buttonhole should be placed with the rounding facing the edge. The sewing of the buttonhole, however, begins at the bartack. Mark the length of the buttonholes on the fabric first, making sure to measure from the starting point inwards. Always sew the buttonholes from the inside outwards towards the edge. The keyhole buttonhole is automatically sewn between a length of 7 and 40 mm. • Select buttonhole No. 46-48. • Press the"o.k." key. • A pre-programmed buttonhole length of 22 mm appears on the display. If you wish, you can alter this length with the number keys 1-0. 1 131