Pfaff creative 7570 Owner's Manual - Page 7
Notes, safety - parts
View all Pfaff creative 7570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Notes on safety Notes on safety for domestic sewing ma: chines in accordance with EN 60335-2-28 and/or IEC 335-2-28 1 - The user must exercise adequate caution with regard to the up and down moving needle and constantly observe the sewing area while working. 2. When leaving the machine, during maintenance work or when changing mechanical parts or accessories, always disconnect the machine from the mains by pulling out the mains plug. 3. The maximum permissable wattage for the sewing lamp is 15 watts. 4. The tension of the drive belt may only be adjusted by a Pfaff mechanic. 5. The machine is to be put into operation according to the indications on the speci fication plate. 6. Do not place any objects in openings on the machine. 7. Do not use the sewing machine if: - there is visible damage its function is disturbed - - it is wet, e.g. with condensation. 8. Do not pull the mains plug out of the socket by its cord. 9. No liability will be accepted for any dama ge caused if this machine is used for any purpose other than that for which it is intended or if it is operated incorrectly. 1 0. To avoid the risk of electric shock, do not open the machine. There are no parts inside the machine which the user can repair. This is solely the responsibility of our qualified service staff. 11. Only original PFAFF parts may be used. Environment The recommended environment is: Ambient temperature 10°C (50"F) to 40°C (140 °F) Air humidity 20% to 80 %. This sewing machine is a high-quality electro nic-mechanical appliance; it is a machine for supervised use in the home. It should be ope rated in such a way that it is not subjected to: dust, severe dampness, direct sunlight, static electricity, heat-producing objects, corrosive chemicals or liquids. The machine is to be used on a firm and even surface which is open for ventilation purposes. Treatment Always protect the machine against damage which could be caused by it being hit or dropped. Cleaning Housing and display: To clean the housing use a dry, clean, soft, lint-free cloth. To remove any stubborn dirt, use a soft cloth moistened with alcohol. Please note! Do not use any insecticides or chemical products such as petrol or liquid chemicals to clean the housing. 3