Pfaff creative 7570 Owner's Manual - Page 48
change - sewing and embroidery machine
View all Pfaff creative 7570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
.. I Li i1 Vi *H 8L ;8 7; b Press cursor key"-*The following is displayed on the screen: Machine stop in case of needle thread message: LI - in sewing mode X - in embroidery mode X - no machine operation due to incorrect sewing foot lifter and feed dog position. Messages marked with a cross are enabled while the others are disabled. If you want to change the messages, e.g. disable the messages in embroidery mode, you must select the corre sponding box with key"l". It is highlighted. By pressing key "2" the cross in the box is deleted and the message is disabled. If you wish to, sa enable the error message in the sewing mode, you must again select the box with key"l"and place the cross in the box with key "2' thus enabling the function. By pressing keys "o.k." or "esc" you return to t[ straight stitch. If all functions are enabled, the machine messages are as follows: If the needle thread breaks - (after 6 stitches max.): Warning: The needle thread is broken or used up. OK? In case of incorrect feed dog position - (when sewing) (not in programs 00, O7 09): Enable feed dog OK? - In case of incorrect feed dog position (when embroidering): In case of incorrect sewing foot lifter position: - - If you are running out of bobbin thread: 44 Lower feed dog OK? Set sewing foot lifter at embroidery or darning position OK? You are running out of bobbin thread OK?